Guide
Thermador vs Viking Ranges: Burners, Build and Service
Thermador vs Viking ranges side by side: burner output, widths, oven depth, fuel choices, common repairs and typical costs for Westport kitchens.
Thermador and Viking both build serious pro-style ranges from 30 to 60 inches wide, and neither one is simply better. Viking leans on raw burner power, with 23,000 BTU front burners on its 7 Series, while Thermador leans on wide flame spread, very low simmering and more induction choices, so the right pick depends on how you cook, how deep your cabinets run and who can service the range near you.
How do the burners compare?
Viking’s 5 Series gas ranges use 15,000 BTU sealed burners, or 12,500 BTU on propane. Select models add a TruPower Plus burner at the front right that reaches 18,500 BTU on natural gas and 16,600 BTU on LP. The 7 Series goes further with Elevation Burners: 23,000 BTU burners across the front row, several 15,000 BTU burners behind them and one 8,000 BTU burner for gentle work. The raised ports also keep boil-overs from baking on.
Thermador’s pitch is spread and control rather than peak output. Its burner caps have pointed edges instead of a plain round rim, which stretches the flame ring and puts heat farther out under a wide pan. Many Thermador gas models also hold a very low simmer by cycling the flame on and off, which helps when you melt chocolate or hold a sauce.
If you sear, stir-fry and boil big pots, Viking’s top end is the draw. If you simmer and braise, Thermador’s low end often wins.
Which sizes and fuel types can you get?
| Point of comparison | Viking | Thermador |
|---|---|---|
| Widths | 5 Series spans 30 to 60 inches; 7 Series 36 and 48; 3 Series 30 only | Pro Grand in 60, 48 and 36 inches; Pro Harmony in 48, 36 and 30 |
| Depth | Check the spec sheet for your series | Pro Grand at a 27-inch commercial depth; Pro Harmony at 24 inches |
| Fuel choices | Sealed gas (VGR), open-burner gas (VGIC), dual fuel (VDR), electric (VER), induction (VIR) | All-gas or dual fuel on Pro Grand; gas, dual fuel or induction on Pro Harmony |
| Example models | VGR7362 and VDR7482 (7 Series); Tuscany dual fuel | PRG305WH gas and PRD305WHU dual fuel (30-inch Pro Harmony) |
| Distinctive option | Open burners on VGIC models | 48-inch PRD486WIGU pairs six gas burners with a Liberty induction zone |
Depth matters more than most buyers expect. Standard base cabinets run about 24 inches deep, so a 27-inch Pro Grand stands slightly proud of the counter, while a Pro Harmony sits close to flush. Measure the cutout, gas line and hood before you choose. Our dual-fuel range page explains what a gas top with an electric oven needs.
Which brand is more reliable?
Neither brand has a clean edge, and most online arguments compare different eras of each line. How the range is used and kept matters more than the badge. The faults technicians see on both look alike:
- Spark igniters that keep clicking after a spill or a wipe-down, until the burner dries.
- Gas oven igniters that weaken over the years, so the oven lights slowly or not at all.
- Convection fan motors, hinges and door gaskets that wear on busy ovens.
- Electronic controls on dual-fuel and induction models, which add precision but also parts that can fail after a power surge.
Open burners are simple to service but need more cleaning underneath; sealed burners wipe down easily. Induction skips igniter faults but relies more on electronics.
What does service look like for each brand?
Common wear parts on both, such as igniters, valves and bake elements, are standard replacement items, so neither range is a dead end. Before you call, find the model plate. On Thermador Pro Grand and Pro Harmony ranges it sits above the main oven or behind the kick plate, depending on the model, and lists the model number (E-Nr.) and production number (FD). On a Viking, have the model and serial number ready too.
Some homes around Westport, especially out toward Weston, Easton and Redding, cook on propane rather than piped natural gas. If yours does, compare LP numbers when you shop: Viking’s 5 Series sealed burners drop from 15,000 to 12,500 BTU on LP, and any gas range needs the correct LP conversion before first use.
Typical ranges: a diagnostic visit runs $95–$149, an oven igniter or bake element $250–$500, cooktop repair $200–$750, and broader range or oven repair $250–$900. The firm quote is given on site after diagnosis. See our Viking and Thermador pages, or book range repair for either brand.
Which one should you choose?
- Choose Viking for the highest burner output, the widest spread of series and fuels, or an open-burner cooktop.
- Choose Thermador for low, steady simmering, gas plus induction on a 48-inch range, or a 24-inch depth that lines up with standard cabinets.
- Either way, confirm your gas type, your electrical supply and a hood sized to the burner output.
Frequently asked questions
Is Viking better than Thermador?
Not across the board. Viking offers more top-end burner power, up to 23,000 BTU on the 7 Series, while Thermador is stronger on low simmering and induction choices.
Are Thermador ranges worth the money?
They are for cooks who value precise low heat and options like a 48-inch range that pairs gas burners with an induction zone. If you mostly boil and sear, a high-output Viking may suit you better.
Which is higher end, Bosch or Thermador?
Thermador is the higher-end brand. The two share a parent company, and Thermador sits above Bosch as the pro-style luxury line.
Who repairs both brands in Westport?
Westport Viking Appliance Repair is an independent service, not manufacturer-authorized, and works on Viking and Thermador ranges. Call (475) 472-9274 to book a visit.